| | Equipment Features:
Precise temperature control: Adopting advanced temperature control system, it can accurately control the heating temperature with a wide range, usually covering room temperature to thousands of degrees Celsius, to ensure the accuracy of testing conditions.
Automatic Measurement: Built-in precision measurement system automatically records the change of sample size and calculates the heat shrinkage rate through software, which improves the accuracy and efficiency of the test.
Contact Force Control: Precise contact force control allows the operator to test small, delicate, fragile or foam samples without destroying or irreversibly deforming the sample. Constant contact force is maintained throughout the test, regardless of sample expansion or contraction. This measurement system avoids sliding, rolling friction and viscous force control. |
Equipment Name | Heat Shrinkage Tester |
Model | NBD-TDA1500-12TI |
Tmax | 1500℃ |
| Rated Temperature | 1450℃ |
Temperature rise rate | 1℃/H-20℃/Min |
Rated power | 1.5KW |
| Power supply | 220V 50HZ |
Displacement sensor precision | 0.1mm |
Measurement Error | 0.1-0.5% |
Size of top bar | 刚玉杆φ6*440mm |
Sample size | φ10*30mm |
| Type of temperature measuring element | S type thermocouple |
| Heating temperature zone size length | Ll150*H120*D120mm |
| Furnace body size | L390*H1050*D470mm |
control system | | 1, sintering process curve setting: dynamic display setting curve, equipment sintering can be pre-stored multiple process curves, each process curve can be freely set;
2, can be booked sintering, unattended sintering process curve sintering;
3、Real-time display of sintering power and voltage information and record sintering data, and can be exported to achieve paperless records;
4, with remote control, real-time observation of the state of the equipment;
5, temperature correction: the difference between the main control temperature and the sample temperature, sintering throughout the non-linear correction. |
| Equipment details | |
Temperature control accuracy | ±1℃ |
net weight | ≈50KG |
Precautions for the use of equipment | 1, equipment hearth temperature ≥ 300 ℃, prohibit the opening of the hearth to avoid injury;
2, the slight crack produced by the continuous use of the furnace chamber is a normal phenomenon, does not affect the normal use of equipment; |
Service Support | One year limited warranty with lifetime support (Warranty does not cover consumable parts such as handling tubes and o-rings, please order replacements at Related Products below). |
