Box Type Thermogravimetric Analyser

Home
Product Center
Tube furnace
1200℃
Three temperature zone
Box Type Thermogravimetric Analyser (TGA)

Product Center

Phone: 400-000-3746

Contact Us

Sale Service： 0371-6320 2801
0371-6320 2805
After-sales service： 0371-6320 2805
MR. CAI： 181-0371-5723
Mr.Gao: 188-3829-0747
Ms.Huang: 188-3829-0748
Email ： nbd@nbdkj.com
Address：8# zhuyuan, Xinhua subdistrict, Xinzheng, Zhengzhou, China

Box Type Thermogravimetric Analyser (TGA)

Release time: 2024-07-10 03:41:12 Number of views: 126

Equipment Description:

It is developed for analysing the weight loss by combustion and pyrolysis (TGA) of materials. It includes several parts, such as balance, heating furnace, programmed temperature control system, recording system, etc. It can observe the change of sample mass with temperature and time during the process of heating up, constant temperature or cooling down, and it is equipped with pyrolysis material condensation collection device. It is widely used in research and development, process optimisation and quality control in the fields of plastics, rubber, coatings, pharmaceuticals, catalysts, inorganic materials, metal materials and composites.

Edit Content

Configuration Details

System features:
1、Stable and reliable control, easy to operate.
2、Advanced PID self-learning fuzzy control, high temperature control accuracy, maintained at ± 1 ℃.
3、Furnace lining adopts high-purity alumina lightweight fibre material, better heat preservation, energy saving and consumption reduction.
4、Data storage function, can save the important parameters of sintering, up to 30 days long (8 hours a day boot).
5、Formulation function, can pre-store more than 100 formulas.
6、Multiple anti-dumbing function, so that customers can use it more safely.
7, networking function, through the RJ45 interface, the use of TCP / IP protocol, you can make the system connected to the host computer (the host computer needs to install the appropriate software).

Edit Content

Product Model	NBD-TGA1200-M20
Main Functions	1. In the process of temperature increase, constant temperature or temperature decrease, it can automatically record the change curve of sample quality with temperature and time;
Electrical specifications	AC220V 4.0KW
Tmax	1150 ℃
Temperature control accuracy	±1℃
Measuring element type	K-type thermocouple 420mm
Heating temperature area size	L200H200D300mm
Furnace size	L680H980D610mm
Load cell range	220g
精度	0.1mg以内
吊丝及坩埚重量	约30g
坩埚材质尺寸	铝/不锈钢 φ60*30mm
最低载克	0~270g
推荐升温速率	≤10℃/min
控制系统			1. 称重传感器量程：220g； 2. 温度曲线设置:可预存15条温度曲线，每条可设置30段“温度-时间”曲线； 3. 控制方式：PLC实现传动机构、温度模块、通气、抽真空及称重模块的自动控制； 4. NBD-101EP嵌入式操作系统中英文互换图形界面，7寸真彩触屏输入，智能式人机对话模式，实时加热功率显示，非线性式样温度修正；实验报告自主生成，实验数据无限次导出。 5. 数据接口：USB数据接口，支持数据导出U盘及在线打印； 6.数据记录方式：按设置好的时间间隔自动存储； 7.称重模块：独有的称重模块，精度及稳定性更高。
称重天平		简单、快速、高效称量的可靠天平。量程为220g；可读性为0.1mg；通过USB和RS232灵活连接；外部校正；密码保护；结构坚固； 10种应用程序，性能准确电磁力补偿称重传感器具有过载保护功能，即使高强度使用，也能提供始终如一的可靠结果。佩戴手套也能操作的触摸屏彩色触摸屏具有直观的用户界面，菜单简单，图标清晰。即使佩戴棉质或橡胶手套也可以轻松操作。配备有金属底座、不锈钢秤盘和过载保护，即使在高强度的日常使用中也能确保可靠性能。
净重	90KG
设备使用注意事项	提前1小时给天平送电。设定好烧结工艺曲线。坩埚已装好。 1小时后，天平清零（是否清零由客户决定），并在坩埚中放入样品。启动烧结，并注意样品重量变化。烧结结束，导出数据分析。注意事项： 1.天平周围不能有大的气流。 2.天平周围不能有大的振动。 3.清零前重量显示不可超过4g，否则不能通过触摸屏清零（但可用天平清零按钮清零）。
服务支持	1年质保，提供终身支持（保修范围内不包括易耗部件，例如炉管和密封圈等）。